How to Prevent Heel Slippage in Boots and Shoes

What is Heel Slipping?

Heel slipping is a disgusting experience of the feet slipping out of a shoe while walking and often popping out entirely leaving the boots at the back. Heel slipping is one of the drastic experiences faced when walking with a new shoe.

It is very common with new shoes as it is rigid at the beginning and the outsole is not comfortable in your feet. After breaking the shoes, the flexing point of all shoe breaks or bend anytime you are walking. Immediately the pairs begin to flex with the movements of your feet; it reduces feet slipping.

Heel slip should reduce when you wear your new shoes regularly for a few days, but if the feet are slipping continuously then it will be seen as trouble. In this case, there are measures to be taken to correct it.

11 Tips on How to Prevent Heel Slippage in Shoes and Boots?

Though most tips talk about how to fix heel slippage in shoes and boots, and there are some that talks about wise choices on how to prevent the issue prior. Follow this step wisely, and it will make a firm decision about your daily choice of footwear.

1. Install Lace Anchors.

One problem with shoelaces is that they can lose all the time. It might look tight when you are leaving the house; nevertheless, you will have a feel of when your feet slip after walking for a few meters. Rather than depending on the old method of tying, try using a limited bowless system.

You can try to set up the anchors, immediately they have been installed, put the lace outside the hole and put your feet inside your boot. You will feel cozy, and you might not need to tighten the lace of the shoe any longer. After setting up the lace anchors, you will need to drag the lace once, and the lace will not move after that, and this will prevent tension at the top of your feet.

This system works in a straightforward method; immediately you pull the lace, it provides a pinch at the flap material of your shoe which does not move. It also means that the pressure that comes from the heel of the shoe does not shift to the other area of the foot and then avoids slippage.

2. Non-Slip Socks.

Invest always in very good non-slip socks that can make your feet cozy and also slip-free in your shoes. If you have a habit of wearing your shoes without socks, then you must think about changing them seriously. Get a non-slippery and thick pair of socks and make sure you use them immediately.

3. Select the Right Size.

This is one of the foremost and critical advices given when you are about to buy shoes; do not make the mistake of this. Choose a comfortable pair of shoes; it should not be too small either too big. There is no doubt that the small size will put the heel slippage in check, but it squeezes your feet and continuously crushes your toes.

A large size will increase the ability of the heels to slip. A comfortable feet size might solve the heel slipping issue; nevertheless, it is not permanent, and you might also need to make more attempts.

Have it in mind that the feet changes with age, and the time of the day. So with time, make sure your feet are measured before buying. Secondly, the perfect time for choosing a good pair of boots is at late hours in the morning because the foot is at the largest size. This is a critical time to avoid issues.

4. Use Double-Sided Tape.

This might not be conventional; so many celebrities are known to use this method. Double-Sided tape is relevant; nevertheless, lose the stickiness immediately you notice your feet sweating. If you do not plan using this step, keep rolls of double-sided tape within reach; it is a quick fix when you want to attend occasions.

5. Use a Boot Dryer.

One of the methods of avoiding your shoes from slipping is to keep them dry within. Using a high-quality boot dryer is acceptable. However, when you continuously use the dryer, it can damage the material of the shoe. You should always use boot dryers with caution.

6. Use Tongue Pads.

The bottom of the tongue of any shoe sometimes peels and sticks. When you attach a tongue pad, it can force the foot back into the counter heel of the boots. It assists the shoe from shifting and protects the heel inside the counter heel.

7. Inbuilt Non-Slip Soles.

You can look for this in specifications, the most pair of boots or shoes comes with a non-slip sole at the bottom, and they are inbuilt. These help in holding the heel well, and this is the easiest way to prevent heel slips.

8. Spray Your Feet Using Hairspray.

Hair spray allows your feet to become sticky and your shoes will stick to it like glue on paper. There is a common idea that hairspray can only be used for the hair, but it can also serve to valid purpose like this.

9. Remain Patient.

The beets are required to accept the feet, or the feet will continuously slip no matter how well you have tried, some feet will still slip regardless of what you have tried. A little slip does not affect the pairs. However, it can be severely irritating. In such cases, it is best if you remain patient and give the new shoe more time to fit according to the feet.

10. Use Lining.

It is possible to line up your shoes with cushions, insoles, and inserts. It will make sure that the feet are more comfortable and keep them from slipping. Try to place the lining at the back of your heels to make them effective.

11. Change Your Walking Step.

In many cases, boot or shoe slippage can be caused by the way you walk. One of the significant causes of boot slipping occurs whenever you walk into your bail area or middle foot. Learn to walk on heels always, and while you are walking, your heel must first touch the ground.

What Should You Do When Your Shoes Are Too Big?

This is a distinct feet issue whereby you have a shoe that is too big and becomes loose in the heel portion. One thing that will work correctly is by having the person that makes shoes insert leather at the bottom or attach heel grips, which allows the foot to move forward slightly. If the shoe is large totally, an insole can solve it apart from that; it is not the type of shoe to be recommended.

1. The Instep of Your Feet Is Just Too Low for the Last Model.

Solution: Insert a tongue pad/or the last model is not for you/distance might work out.

If you have a bit low instep than what fits a last and model, there might be a problem with your shoe in keeping your foot down in this area. If you have a little instep derby and monk shoes can be additionally tricky. It is also possible to attach a tongue pad, whether a form of self-adhesive pads which is allowed under the tongue or you have a shoemaker put in any leather which is sometimes better.

This fills the space in the insteps, and the shoe can be tight enough. There is also a thin insole that will operate if the shoe is large in every other area also. If this does not work out, then this is not the last/model for you. The person who wears it as very low instep for the shoe which is noticed in how many spaces there is at the side of the opening. Even when the person tightens the lace a bit more, there will still be problems.

2. The Shoe Is Rigid When It Is New.

Solution: Break the shoe so that it can bend and soften easily.

Welted shoes with leather soles bought newly, inclusive of rubbers and specifically if they are double can be somewhat as hard as new. Different layers of the stiff leather require being bent over and over continuously until it is soft, and pending the time the shoes are still hard; it is not common the heel slippage occurs. When the shoes are worn new, there are not similar resistances when the shoes are bent, and the slippage diminishes totally.


Heel slipping can be a painful issue; nevertheless preventing it is not impossible, but there are few cautions beforehand. Though, it requires some work that deserves the efforts. You cannot risk your health all the time by being on a slippery base per time. Constant friction with slippage might also cause some serious wounds and blisters.

Moreover, the workplace is always filled with apparatus and tools so you cannot go with footwear that is slippery. Knowing your feet perfectly well is the key, be sure that your boots and feet are dry. Buy your boots or shoes from a reputable manufacturer, and most boots are also slip-resistant both outside and inside. Keep these tips on how to prevent heel slippage in boots and shoes in mind, and then you can walk confidently.

Leave a Reply